Knowee
Questions
Features
Study Tools

In the programming to MSP430G2553 MCU's ADC10, the statement ADC10CTL0 |= ENC + ADC10SC; is used to:Select one:start conversion by softwarenone of the othersstart conversion by hardwarestart conversion by Timer A

Question

In the programming to MSP430G2553 MCU's ADC10, the statement ADC10CTL0 |= ENC + ADC10SC; is used to:Select one:start conversion by softwarenone of the othersstart conversion by hardwarestart conversion by Timer A

🧐 Not the exact question you are looking for?Go ask a question

Solution

The statement ADC10CTL0 |= ENC + ADC10SC; in MSP430G2553 MCU's ADC10 programming is used to start conversion by software.

Here's a step-by-step explanation:

  1. ADC10CTL0 is a control register for the ADC10. It is used to configure various settings for the ADC10.

  2. ENC stands for "Enable Conversion". It is a bit that is set to 1 to enable the start of a conversion.

  3. ADC10SC stands for "ADC10 Start Conversion". It is a bit that is set to 1 to start a conversion.

  4. The |= operator is a bitwise OR assignment operator. It takes the current value of ADC10CTL0, performs a bitwise OR with ENC + ADC10SC, and assigns the result back to ADC10CTL0.

  5. So, ADC10CTL0 |= ENC + ADC10SC; effectively sets the ENC and ADC10SC bits in the ADC10CTL0 register, which starts a conversion by software.

This problem has been solved

Similar Questions

In the programming to MSP430G2553 MCU's ADC10, the statement ADC10CTL1 = ADC10DIV_3; is used to:Select one:choose A0 input channel, ADC10OSC, division coefficient 4, single channel single conversionchoose A1 input channel, ADC10OSC, division coefficient 4, single channel single conversionchoose A0 input channel, SMCLK, division coefficient 4, single channel single conversionchoose A0 input channel, ADC10OSC, division coefficient 3, single channel single conversion

The inputs to the MSP430G2553 MCU's ADC10 is selected from which bit field of the ADC10CTL1 register?Select one:None of the othersADC10SSELxINCHxADC10DIVxSHSx

nterfacing ADC with 8085 where will the output of conversion store.?

A sequence of channels is sampled and converted repeatedly. The sequence begins with the channel selected by INCHx and decrements to channel A0. Each ADC result is written to ADC10MEM. The sequence ends after conversion of channel A0, and the next trigger signal re-starts the sequence. Answer 1

A sequence of channels is sampled and converted once. The sequence begins with the channel selected by INCHx and decrements to channel A0. Each ADC result is written to ADC10MEM. The sequence stops after conversion of channel A0. Answer 2

1/1

Upgrade your grade with Knowee

Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.