What are the steps for successful passing?A) Signal intent, check for blind spots, scan for hazardsB) Check for blind spots, scan for hazards, establish a safe response for hazardsC) Identify an end-of-pass gap to pull back into lane, scan for hazards, establish a safe response for hazardsD) Scan for hazards, check for blind spots, establish a safe response for hazards
Question
What are the steps for successful passing?A) Signal intent, check for blind spots, scan for hazardsB) Check for blind spots, scan for hazards, establish a safe response for hazardsC) Identify an end-of-pass gap to pull back into lane, scan for hazards, establish a safe response for hazardsD) Scan for hazards, check for blind spots, establish a safe response for hazards
Solution 1
The steps for successful passing are:
-
Signal intent: This is the first step in letting other drivers know your intentions. Use your vehicle's turn signals to indicate that you plan to change lanes or pass another vehicle.
-
Check for blind spots: Before you make any moves, it's crucial to check your blind spots. These are areas that your mirrors can't cover. You can check your blind spots by quickly turning your head and looking over your shoulder.
-
Scan for hazards: Look ahead and around your vehicle to identify any potential hazards. This could include other vehicles, pedestrians, or road conditions that could make passing unsafe.
-
Identify an end-of-pass gap to pull back into lane: Before you start passing, you should identify a space in the lane you're passing where you can safely return after overtaking the other vehicle.
-
Establish a safe response for hazards: If you identify any hazards during your scan, you should establish a safe response. This could involve slowing down, changing your passing plan, or even aborting the pass altogether.
So, the correct answer is a combination of options A and C.
Solution 2
The steps for successful passing are:
-
Signal intent: This is the first step in letting other drivers know your intentions. Use your vehicle's turn signals to indicate that you plan to change lanes or pass another vehicle.
-
Check for blind spots: Before you start to pass, check your mirrors and look over your shoulder to make sure there are no other vehicles in your blind spots.
-
Scan for hazards: Look ahead and around your vehicle to identify any potential hazards. This could include other vehicles, pedestrians, or road conditions that could make passing unsafe.
-
Establish a safe response for hazards: If you identify any potential hazards, determine the best way to respond. This could involve slowing down, changing lanes, or even aborting your pass altogether.
-
Identify an end-of-pass gap to pull back into lane: Once you've passed the other vehicle, make sure there's enough space for you to safely return to your lane. Don't cut off the other driver.
So, the correct order would be A) Signal intent, check for blind spots, scan for
Similar Questions
What should you check before passing a vehicle?a.Bicycles that may be hidden.b.Vehicles turning left in front of you.c.Pedestrians entering the road from another driveway.d.All of the above.
Anytime a driver moves more than one car width to the right or left in a lane change or turn, they should:*1 pointA. Check rear-view mirror and if safe, move over.B. Honk and move over. If someone is there, give him a “thank you” wave.C. Check traffic, signal 1-2-3 and if safe, move over and cancel signal.D. Signal, check rearview mirror and if safe, move over.
10._____________ is important when passing, approaching a vehicle or obstruction, and turning.
ROAD SIGNS PRACTICE TESTNot Sure You Will Pass?Get a Pass Guarantee UPGRADE TO PREMIUM511.From the center lane, drivers can:pass slow-moving vehicles.make U-turns.make left turns.All of the above.
3.While driving, you need to focus on the sides of your path or "line of sight" at all times.A. True in all circumstancesB. True, but only at night or in poor weather conditionsC. False, the focal point in your line of sight is where you need to be looking at all times.D. False, however, while you do not need to "focus" on the sides of your path, you do need to scan them occasionally.4.The following items are often found at UNCONTROLLED intersections:A. Signal lightsB. "Stop" or "Yield" signsC. "No Left Turn" or "No Right Turn" SignsD. None of the above5.Getting the big picture, using points of reference, choosing a target area, establishing a line of sight along your path of travel, using visual search techniques, and applying the SEEiT space management system is all part of _____________.A. Safely driving a vehicle larger than a compact carB. Processing informationC. Analyzing informationD. Digesting information6.What is a "target area"?A. The area illuminated by your vehicle's headlightsB. The speed which you are trying to reach (either by accelerating or decelerating)C. A shopping center parking lotD. The next area towards which you intend to drive your vehicle7.Two ways of increasing your reaction time to sudden obstacles that can appear while you are driving are 1) driving more slowly and 2) ___________.A. Keep your eyes focused on focal points that are in the immediate vicinity of your vehicleB. Looking further ahead (i.e.--choosing a focal point that is further away from your vehicle, but one you can still see clearly)C. Drinking coffee or soda while drivingD. Riding the brake
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.