Sure, here are three networking Linux commands that you can try:

1. `ping`: This command is used to test the network connection between your system and the server. It sends ICMP Echo Request packets to the network host and gives the response time. Here's how you can use it:

- Open your terminal.
- Type `ping www.google.com` and press Enter. You should see a continuous stream of lines that look something like this: `64 bytes from www.google.com (172.217.5.228): icmp_seq=1 ttl=53 time=22.4 ms`.
- To stop the command, press `Ctrl + C`.

2. `netstat`: This command displays various network related information such as network connections, routing tables, interface statistics, masquerade connections, multicast memberships etc. Here's how you can use it:

- Open your terminal.
- Type `netstat` and press Enter. You'll see a list of active connections.
- To see the routing table, type `netstat -r` and press Enter.

3. `ifconfig`: This command is used to display or configure a network interface. Here's how you can use it:

- Open your terminal.
- Type `ifconfig` and press Enter. You'll see information about all network interfaces currently in operation.
- To see information about a specific interface, type `ifconfig [interface]`. For example, `ifconfig eth0`.

Remember, you need to have the necessary permissions to execute these commands. If you're not the root user, you might need to use `sudo` before these commands.

Question

Sure, here are three networking Linux commands that you can try:

1. `ping`: This command is used to test the network connection between your system and the server. It sends ICMP Echo Request packets to the network host and gives the response time. Here's how you can use it:

- Open your terminal.
   - Type `ping www.google.com` and press Enter. You should see a continuous stream of lines that look something like this: `64 bytes from www.google.com (172.217.5.228): icmp_seq=1 ttl=53 time=22.4 ms`.
   - To stop the command, press `Ctrl + C`.

2. `netstat`: This command displays various network related information such as network connections, routing tables, interface statistics, masquerade connections, multicast memberships etc. Here's how you can use it:

- Open your terminal.
   - Type `netstat` and press Enter. You'll see a list of active connections.
   - To see the routing table, type `netstat -r` and press Enter.

3. `ifconfig`: This command is used to display or configure a network interface. Here's how you can use it:

- Open your terminal.
   - Type `ifconfig` and press Enter. You'll see information about all network interfaces currently in operation.
   - To see information about a specific interface, type `ifconfig [interface]`. For example, `ifconfig eth0`.

Remember, you need to have the necessary permissions to execute these commands. If you're not the root user, you might need to use `sudo` before these commands.

Knowee AI · Accepted Answer