ailure of the speeder spring in the governor of a CSU will cause the blades to moveQuestion 26Select one:a.Fully coarse with a drop in RPMb.Fully fine with a rise in RPMc.Fully coarse with a rise in RPMd.Fully fine with a drop in RPM

If a failure in the propeller hub of a CSU caused the blades to lock into one pitch setting, the RPM wouldQuestion 16Select one:a.Slowly increase to the red lineb.Gradually decreasec.Change whenever engine power changedd.Fluctuate

In a high speed high powered descent an aircraft fitted with a CSU could experience the propeller moving to the fullQuestion 19Select one:a.Fine stop and engine leaning to cut outb.Coarse stop and engine running rough due over rich mixturec.Coarse stop and engine over speedingd.Fine stop and engine over speeding

If a propeller governor senses overspeed it will move the propeller blades towardsQuestion 18Select one:a.Fine pitch and increased propeller torqueb.Coarse pitch and increased propeller torquec.Fine pitch and decreased propeller torqued.Coarse pitch and decreased propeller torque

For take-off the CSU would automatically set the blade angle of a constant speed propeller at an angle which producesQuestion 8Select one:a.Equal pressure on each side of the bladeb.High drag forces on the propeller to increase power available in the climbc.A large angle of attackd.A small angle of attack

For a normally aspirated engine with a CSU equipped propeller if the throttle and pitch lever are not adjusted a climb to a higher altitude will result inQuestion 38Select one:a.MP and RPM increasingb.MP and RPM remaining constantc.MP and RPM decreasingd.MP decreasing and RPM increasinge.MP decreasing and RPM remaining constantf.MP increasing and RPM remaining constant