QUESTION:What is depth of cut? Depth of cut is the:POSSIBLE ANSWERS:Total surface measurement of the discarded workpiece material.Measure of how far the tool plunges into the workpiece.Width of the tool subtracted from the workpiece diameter.Linear length of the cut along the machined workpiece surface.

The depth of cut of the paring off operation on the center lathe is based on:Question 10Select one:cutting speeddimensions of the cutting toolradius of work partdiameter of work partfeedrate

QUESTION:What is used to describe the size, thickness, and shape of an indexable cutting tool?POSSIBLE ANSWERS:Angle nomenclatureCut dimensionsTool signatureInsert number

If the average cutting speed on a shaper is 15 [m/min] , speed ratio 0.7, work part length is 168 [mm] and both start and end allowances are 1 [mm], raw material width is 77 and start and end allowances are 1 each.  Machining time is _______ [sec].Question 3Answer176215911835

What angles describe the space between the tool flanks and the newly cut workpiece surface?POSSIBLE ANSWERS:Rake anglesRelief anglesShank anglesShoulder angles

The main cutting force acting on a tool during the turning (orthogonal cutting) operation of a metal is 400 N. The turning was performed using 2 mm depth of cut and 0.1 mm/rev feed rate. The specific culling pressure (in N/??2) is: