You work as the IT administrator for a small corporate network. One of the company employees needs to add an additional PCI card to the motherboard. When you open the computer, you see that the card that you purchased does not fit due to the card's height. Which of the following is the BEST method for using the newly purchased card? answer Use a riser card to allow the new card to be installed parallel to the motherboard. Use a FireWire card to allow the new card to be installed parallel to the motherboard. Use a parallel card to allow the new card to be installed parallel to the motherboard. Use an expanded case to accommodate the height of the newly purchased card.
Question
You work as the IT administrator for a small corporate network. One of the company employees needs to add an additional PCI card to the motherboard. When you open the computer, you see that the card that you purchased does not fit due to the card's height.
Which of the following is the BEST method for using the newly purchased card?
answer
Use a riser card to allow the new card to be installed parallel to the motherboard.
Use a FireWire card to allow the new card to be installed parallel to the motherboard.
Use a parallel card to allow the new card to be installed parallel to the motherboard.
Use an expanded case to accommodate the height of the newly purchased card.
Solution
The best method for using the newly purchased card would be to use a riser card to allow the new card to be installed parallel to the motherboard. A riser card is a printed circuit board that gives a hardware interface from the motherboard to add-on cards. This would allow the new card to fit despite its height.
Using a FireWire card or a parallel card would not solve the issue as these are types of interface cards, not solutions for fitting a card of a different size.
Using an expanded case could potentially work, but it would likely be more costly and time-consuming than simply using a riser card. Therefore, the best solution is to use a riser card.
Similar Questions
A technician is installing a new high-end video adapter card into an expansion slot on a motherboard. What may be needed to operate this video adapter card?PCI expansion slotPCIe x 8 expansion slot24-pin ATX power connectorTwo 8-pin power connectors
What is the difference between PCI and PCIe network card?
You decided to upgrade your PC with a faster processor. To do this, you ordered a new motherboard over the internet that supports the processor that you want to use. When the motherboard arrives, you discover that the motherboard uses the Micro-ATX form factor. Your current case is an ATX mid-tower with a standard ATX motherboard inside. Which steps must you take for the Micro-ATX motherboard to work in the ATX case? answer Drill new holes in the Micro-ATX motherboard to match the mounting hole pattern in the ATX case. No additional steps are necessary. You can install the Micro-ATX motherboard in the ATX case. Drill new holes in the ATX case to match the mounting hole pattern in the Micro-ATX motherboard. Return the motherboard and replace it with an ATX form factor motherboard, as the Micro-ATX motherboard does not fit without modifying the case.
Timothy works in the graphic arts departments and has received approval to upgrade his video card. The card has arrived, and you are ready to begin the upgrade by replacing the old video card with the new one in his workstation. To ensure your personal safety, which of the following should you do FIRST? answer Remove jewelry. Disconnect power. Put on safety glasses. Place the computer on an ESD mat.
Select the device(s) connected to the PCI: Group of answer choicesHard drivesKeyboardGraphics CardNetwork adapter
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.