Which factor/s is/are supposed to have the equal values at both phases of transmission and reception levels with an intimation of error-free serial communication ?1 pointStatus of Parity bitsBaud Ratenone of theseNumber of data bits & stop bits

What is the bit transmitting or receiving capability of mode 1 in serial communication ?1 point10 bits8 bits12 bits11 bits

n error in bit transmission (perhaps due to noise) may not be detected, even if a parity bit is used.1 pointTrueFalse

In a computer network, a device A is sending a series of 8-bit binary data packets todevice B. To ensure that the data is transmitted correctly, a parity bit is used forsimple error detection. Each 8-bit data packet is followed by a single parity bit,making it a 9-bit packet. Assume that an odd parity check is used.For each of the following 8-bit data packets, calculate the appropriate parity bit andprovide the resulting 9-bit packet:a) 11010110 ………………………………………………………………………………...………………………………………………………………………………………………[1]b) 00110011………………………………………………………………………………...………………………………………………………………………………………………[1]c) 11111100………………………………………………………………………………...………………………………………………………………………………………………[1]Explain why using a parity bit can help detect errors in these data packets.…………………………………………………………………………………………………..…………………………………………………………………………………………………..……………………………………………………………………………………………….[1]

Transmission data rate is decided by

When data is encoded on an electromagnetic carrier such as the radio band using more than one channel, the transceiver is only half-duplex communication.a.Depends on the modulation used.b.Truec.Depends on the protocol used.d.False