You are a network consultant hired to perform a manual site survey for a small office building. The wireless network to be installed will use data and voice. For backward compatibility, the customer needs to support 2.4 GHz equipment. To provide the highest QoS for the voice application, you recommend that the received signal strength be a minimum of ___________ for a data rate of 54 mbps.This type of question contains radio buttons and checkboxes for selection of options. Use Tab for navigation and Enter or space to select the option.optionA-76 dBm optionB-67 dBm optionC-25 dBm optionD-20 dBm

Question 13 :If the received signal strength is -55 dBm and the noise floor is -95 dBm, then the signal-to-noise ratio will be ______ dB.This type of question contains radio buttons and checkboxes for selection of options. Use Tab for navigation and Enter or space to select the option.optionA75 optionB20 optionC40 optionD150

he physical ______ of a building may determine whether a complete Wireless LAN RF site survey is necessary.This type of question contains radio buttons and checkboxes for selection of options. Use Tab for navigation and Enter or space to select the option.optionAstructure optionBsize optionCenvironment optionDdesign

The range of a 2.4 GHz signal is mostly dependent on which RF characteristic?This type of question contains radio buttons and checkboxes for selection of options. Use Tab for navigation and Enter or space to select the option.optionAFrequencyoptionBWavelengthoptionCAmplitudeoptionDPhase

ou need to perform a site survey for a small real estate office that currently has no wireless network. Which factors must be considered as part of the site survey?This type of question contains radio buttons and checkboxes for selection of options. Use Tab for navigation and Enter or space to select the option.optionAEnvironmental conditions optionBPacket analysis optionCSpectrum analysis optionDCorrect antenna selection

Question 17 :In the 2.4 GHz range, what distance between the center frequencies (in MHz) is required for two channels to be considered nonoverlapping for HR/DSSS?This type of question contains radio buttons and checkboxes for selection of options. Use Tab for navigation and Enter or space to select the option.optionA30 MHzoptionB25 MHzoptionC22 MHzoptionD5 MHz