What will be the power dissipation across a silicon diode carrying a current of 50mA?Choose the best optionClear Response25mW5OmW35mW100mW
Question
What will be the power dissipation across a silicon diode carrying a current of 50mA?Choose the best optionClear Response25mW5OmW35mW100mW
Solution
To calculate the power dissipation across a silicon diode, we use the formula:
P = IV
where: P is the power dissipation, I is the current, and V is the voltage.
For a silicon diode, the voltage is typically about 0.7V.
Given that the current I is 50mA, or 0.05A, we can substitute these values into the formula:
P = 0.05A * 0.7V = 0.035W or 35mW
So, the power dissipation across a silicon diode carrying a current of 50mA is 35mW.
Similar Questions
Fom the piece-wise model of a diode we get: Dynamic resistance (rd) of the diode is 50 mΩ and knee voltage (vd) is 0.6V. This diode is connected in series with a 40V square wave voltage source (min=0V, max=40V, Duty ratio=0.25) and 20Ω resistance (RL). ON state power loss for the diode approximately is ____________ W.Select one:a. 0.35b. 1.4c. 1d. 0.8e. None of the Above
As per typical I-V Characteristic of ultrafast diode: MUR1660CTG, the Dynamic resistance at 25 degrees Celsius is approximately:0.125 Ohms and the Max. instantaneous forward voltage is 1.5 V. If a square wave current of 10A peak and 50 percent duty cycle is passed through the diode. The total conduction loss in the diode in Watts would be:Select one:a. 15b. 18.125c. 10.25d. 13.75
As per typical I-V Characteristic of ultrafast diode: MUR1660CTG, the Dynamic resistance at 25 degrees Celsius is approximately:0.125 Ohms and the Max. instantaneous forward voltage is 1.5 V. If a square wave current of 10A peak and 50 percent duty cycle is passed through the diode. The total conduction loss in the diode in Watts would be:Select one:a. 18.125b. 13.75c. 15d. 10.25
As per typical I-V Characteristic of ultrafast diode: MUR1660CTG, the Dynamic resistance at 25 degrees Celsius is approximately:0.125 Ohms and the Max. instantaneous forward voltage is 1.5 V. If a square wave current of 10A peak and 50 percent duty cycle is passed through the diode. The total conduction loss in the diode in Watts would be:Select one:a. 15b. 13.75c. 10.25d. 18.125
As per typical I-V Characteristic of ultrafast diode: MUR1660CTG, the Dynamic resistance at 25 degrees Celsius is approximately:0.125 Ohms and the Max. instantaneous forward voltage is 1.5 V. If a square wave current of 10A peak and 50 percent duty cycle is passed through the diode. The total conduction loss in the diode in Watts would be:Select one:a. 13.75b. 10.25c. 15d. 18.125
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.