GIVE AT LEAST 3 REASONS WHY THE EXPERIMENTAL RESONANT FREQUENCY DIFFERS FROM THE RESONANT REQUENCY GIVEN IN EACH TUNING FORK.
Question
GIVE AT LEAST 3 REASONS WHY THE EXPERIMENTAL RESONANT FREQUENCY DIFFERS FROM THE RESONANT REQUENCY GIVEN IN EACH TUNING FORK.
Solution
-
Measurement Errors: These can occur due to inaccuracies in the equipment used to measure the frequency. For example, if the tuning fork is not struck correctly, it may not vibrate at its natural frequency, leading to a discrepancy between the experimental and theoretical resonant frequencies.
-
Environmental Factors: Factors such as temperature, humidity, and air pressure can affect the speed of sound, and thus the resonant frequency. For instance, if the experiment is conducted in a room with high humidity, the speed of sound may be slower, causing the experimental resonant frequency to be lower than the theoretical one.
-
Manufacturing Variations: No two tuning forks are exactly alike. Small variations in the material, shape, or size of the tuning fork can cause its natural frequency to differ slightly from the theoretical value. This can lead to a discrepancy between the experimental and theoretical resonant frequencies.
Similar Questions
The frequency of tuning fork A is 2% more than the frequency of a standard tuning fork. Fre-quency of tuning fork B is 3%. less than the frequency of standard fork. If 6 beats per second areheard when two forks Aand B are excited. The frequency of tuning fork A is
A tuning fork of frequency 1000 Hz is sounded over resonance tube as shown in the figure. Speed of sound is v = 320 m/s and area of cross-section of tube is 200 cm2 at the level of 100 cm a water outlet is attached. The water outlet has area of cross section a = 1 cm2 water outlet is opened at time t = 0 . Neglect the end effect of resonance tube.
A resonance occurs with a tuning fork and air column of size 12cm. the next higher resonance occurs with an air column of 38cm. What is the frequency of the tuning fork? Assume that the speed of sound is 312m/s
A source of sound and an observer are moving with velocities Vs =(21 +4j)m/s and Vo=(6 - 3j)m/s. Iffrequency of source is 400 Hz, then frequency observed by the observer will be(1) 360 Hz(2) 380 Hz(3) 400 Hz(4) 440 HzAn unknown tuningfork sounded together withtuning fork of fremuona 250mmitt...ADD ANSWER+5 PTS
A guitar string with a tension of 150 N is played together with a tuning fork whose frequency is 256 Hz, and beats of 2 Hz are heard. Assuming the guitar string is higher in frequency than the tuning fork, to what new tension should the guitar string be adjusted for the string and tuning fork to have the same frequency?
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.