Technician A states that when installing a pressure plate, the retaining bolts are normally torqued one at a time in a star-pattern. Technician B states that when installing a pressure plate, the retaining bolts should be torqued in a circle. Which technician is correct?

Technician A says you should replace an excessively worn throwout bearing. Technician B says you should check pressure plate fasteners for correct torque. Which technician is correct?

Technician A says you should final torque the control arm bolts after a bushing replacement with the vehicle at the correct ride height. Technician B says that ball joints may be bolted to or pressed into the lower control arm. Which technician is correct?

Technician A says that a warped pressure plate may cause the clutch to fail to properly engage and disengage. Technician B says that you can check the pressure plate for warpage with a straight edge and feeler gauge. Which technician is correct?

torque acting clockwise is taken as

What is normal force acting on each bolt (ϒTex)in corner connection 5 bolts are arranged in one row connecting gusset plate with thickness 10 mm and two angles 80*8, with e = 3 cm and P = 10 cm, using M20 grade 8.8 bolts. Steel used is steel 52. Cat.A, N=7 t (Factored load)?a.3.6tb.4.4tc.6.2 td.1.4t