A Schottky diode carrying current of Square wave @ 20A PK-PK @ duty cycle of 60% and a frequency of 100kHz with a forward voltage drop (Vf) of 0.3V is used in a power converter. The conduction loss in Watts would be: . Select one:a. 7.2 Wb. 3.6 Wc. 10 Wd. 1.8 W
Question
A Schottky diode carrying current of Square wave @ 20A PK-PK @ duty cycle of 60% and a frequency of 100kHz with a forward voltage drop (Vf) of 0.3V is used in a power converter. The conduction loss in Watts would be: . Select one:a. 7.2 Wb. 3.6 Wc. 10 Wd. 1.8 W
Solution
To calculate the conduction loss in a Schottky diode, we can use the formula:
P = Iavg * Vf
where:
- Iavg is the average current
- Vf is the forward voltage drop
Given:
- The peak-to-peak current (Ipp) is 20A
- The duty cycle is 60% or 0.6
- The forward voltage drop (Vf) is 0.3V
First, we need to calculate the average current (Iavg). For a square wave, the average current over a period is given by the peak current times the duty cycle. So,
Iavg = Ipp * Duty Cycle = 20A * 0.6 = 12A
Then, we can calculate the conduction loss (P):
P = Iavg * Vf = 12A * 0.3V = 3.6W
So, the conduction loss in the Schottky diode is 3.6 Watts. Therefore, the correct answer is (b) 3.6 W.
Similar Questions
A Schottky diode carrying current of Square wave @ 20A PK-PK @ duty cycle of 60% and a frequency of 100kHz with a forward voltage drop (Vf) of 0.3V is used in a power converter. The reverse recovery current is given as 0.5A and the reverse recovery time is given as 100ns with the maximum reverse blocking voltage as 400V. The on-off switching loss is computed as: Select one:a. 0.5 Wb. None of the given choicesc. 2 Wd. 1 Watt
A Schottky diode carrying current (If) of 10A with forward voltage drop (Vf) of 0.2V is used in a power converter. If the diode has junction to ambient thermal resistance Rth_ja = 40 deg.C/W and operating at ambient temperature Ta = 20 deg.C. Calculate the junction temperature (Tj) accounting only for conduction losses in degrees Celsius.... Select one:a. 80b. 120c. 140d. 100
As per typical I-V Characteristic of ultrafast diode: MUR1660CTG, the Dynamic resistance at 25 degrees Celsius is approximately:0.125 Ohms and the Max. instantaneous forward voltage is 1.5 V. If a square wave current of 10A peak and 50 percent duty cycle is passed through the diode. The total conduction loss in the diode in Watts would be:
Fom the piece-wise model of a diode we get: Dynamic resistance (rd) of the diode is 50 mΩ and knee voltage (vd) is 0.6V. This diode is connected in series with a 40V square wave voltage source (min=0V, max=40V, Duty ratio=0.25) and 20Ω resistance (RL). ON state power loss for the diode approximately is ____________ W.Select one:a. 0.35b. 1.4c. 1d. 0.8e. None of the Above
A typical reverse recovery time @ dIF/dt = 25A and 25 degree Celsius for a fast diode VS-70HFL is given as 500 ns and a typical reverse recovered charge is given as 1300 nC. If the off-state reverse voltage in certain application is 540 Volts and the operating frequency is 20kHz. The switching power loss in Watts is given as approximately:Select one:a. 4b. 7c. 5d. 10
Upgrade your grade with Knowee
Get personalized homework help. Review tough concepts in more detail, or go deeper into your topic by exploring other relevant questions.